Saber Select Series Twin Air Compressor & Inflation Kit

For airing tyres back up after the beach, corrugations or a day on the tracks, the Saber Select Series Twin Air Compressor delivers serious airflow without needing to commit to the larger hard-case version.

With a rated output of 135LPM and a 100% duty cycle at 72PSI, it’s made for working through a full set of 4WD tyres without the short run-times associated with many smaller portable compressors. The supplied inflation kit and heavy-duty air hose mean you’ve got the essentials to get started straight out of the box. At 12.1kg, it’s also lighter than the hard-case model, making it a good option for permanent installations or anyone who already has a suitable place to store and protect their compressor.

Key Features

• Twin-cylinder 12V air compressor
• 135LPM rated airflow
• 100% duty cycle at 72PSI
• Complete inflation kit included
• Heavy-duty air hose included
• Integrated internal cooling fan
• Advanced cooling-fin design
• Dual-fuse power harness included
• 2 × 50A ANS fuses
• Automatic pressure cut-off switch
• Thermal overload protection
• Electrical overload protection
• Integrated serviceable air filters
• 3-year warranty

Built for Regular Airing Up

If you’re regularly dropping tyre pressures for sand, gravel or off-road travel, compressor performance matters. Saber rates the Select Series at 135 litres per minute, with a published inflation time of approximately 2 minutes 15 seconds to take a 265/70R17 tyre from 0 to 40PSI under its test conditions. Actual inflation time will vary with tyre size, starting pressure, temperature and electrical supply, but it gives a useful indication of the compressor’s performance.

100% Duty Cycle

The Select Series is rated for a 100% duty cycle at 72PSI, allowing continuous operation within its rated conditions.That’s particularly useful when you’re working through four larger 4WD tyres one after another rather than just topping up a single tyre.

Designed to Manage Heat

Twin compressors generate plenty of heat when they’re working hard. The Select Series uses an integrated cooling fan and finned housing design to help manage temperature during extended operation, alongside thermal protection if operating conditions move outside the compressor’s safe range.

Ready to Inflate

The compressor comes with the inflation equipment needed to get air to the tyres, including a heavy-duty hose.

That makes it a practical option for:

• 4WD touring
• Beach and sand driving
• Corrugated roads
• Off-road tyre inflation
• Caravans and camper trailers
• Workshop and shed setups
• Permanent vehicle or canopy installations
• General compressed-air duties within the compressor’s specifications

Electrical Protection Built In

The compressor operates from a 12V supply and is supplied with a dual-fuse wiring harness using two 50A ANS-type fuses.

It also incorporates:

• Electrical overload protection
• Thermal overload protection
• Automatic pressure cut-off
• Integrated cooling

As with any high-current 12V equipment, cabling, connections and power supply need to be suitable for the compressor’s current demand.

No Hard Case Included

This version is supplied without the portable hard case used on the Saber Select Series Hard Case model. If you want a self-contained portable setup with protective storage and an integrated air reservoir, the hard-case version may be the better choice. If you’re mounting the compressor into a canopy, drawer system or dedicated electrical compartment, this version keeps the setup simpler and lighter.

Specifications

Shipping Australia Wide

Orders are dispatched quickly from Australia. Questions? Hit us up, we're 4WDers too and happy to help.