Victron Cerbo GX MK2 & GX Touch 70 Display Combo
- Regular price
- $769.00
- Sale price
- $769.00
- Regular price
Product details
The Victron Cerbo GX MK2 and GX Touch 70 combo brings compatible Victron equipment together into one central monitoring and control system. The Cerbo GX MK2 connects to equipment such as MultiPlus inverter/chargers, SmartSolar regulators, SmartShunts, compatible batteries, tank senders and temperature sensors. The GX Touch 70 then provides a 7-inch touchscreen for viewing system data and changing supported settings from one place.
When connected to the internet, the Cerbo GX can also upload system data to Victron Remote Management (VRM) for remote monitoring, alerts and historical data.
Central Monitoring for a Victron System
The Cerbo GX MK2 acts as the communication hub between connected Victron equipment. Depending on the components in your system, the GX interface can display information such as:
-
battery state of charge and current
-
solar production
-
inverter and charger status
-
AC input and output
-
DC loads
-
tank levels
-
temperatures
-
system alarms
The information available depends on the devices and sensors connected to the Cerbo GX. For example, battery state of charge requires data from a compatible battery monitor, BMS or battery rather than being calculated by the Cerbo GX itself.
GX Touch 70 7-Inch Display
The GX Touch 70 provides a 1024 × 600 touchscreen interface for the Cerbo GX. It connects directly to the Cerbo using its combined 2m cable, with HDMI carrying the display signal and USB providing power.
No separate display configuration is required. Once connected and powered, the Victron Remote Console interface is shown on the screen. The standard GX Touch 70 is designed for surface or wall mounting and measures just 13.5mm deep.
Remote Monitoring with VRM
Connect the Cerbo GX to the internet using its built in Wi-Fi or Ethernet connection and the system can communicate with the Victron Remote Management portal. VRM can provide remote access to live system data, historical information, alarms and supported remote controls.
This is useful for caravans, boats and remote power systems where you may want to check the electrical system without being physically at the installation. An active internet connection is required for VRM remote access.
Multiple Victron Communication Ports
The Cerbo GX MK2 provides several ways to connect equipment:
-
3 × isolated VE.Direct ports
-
2 × parallel VE.Bus RJ45 sockets
-
2 × VE.Can ports
-
3 × USB host ports
-
Ethernet
-
built in Wi-Fi
-
Bluetooth
One VE.Can port is galvanically isolated, while the second is non-isolated. This gives the MK2 enough connection flexibility for larger systems containing several chargers, an inverter/charger, battery monitoring and CAN-connected equipment.
Tank, Temperature & Digital Monitoring
The Cerbo GX MK2 also includes:
-
4 × resistive tank level inputs
-
4 × temperature sensor inputs
-
4 × digital inputs
-
2 × programmable relays
This allows the GX system to monitor more than just the electrical equipment. With suitable sensors installed, tank levels and temperatures can be incorporated into the same GX interface.
The relays can also be configured for supported functions such as generator control, alarms, temperature based switching or manual control.
Bluetooth Is Primarily for Setup
Bluetooth is built into the Cerbo GX MK2, but it should not be confused with the Bluetooth connection used by SmartSolar controllers, SmartShunts and other Victron Smart products. The Cerbo GX Bluetooth connection is primarily used to assist with initial configuration and network setup.
Devices such as SmartSolar regulators generally connect to the Cerbo through VE.Direct or another supported wired communication method rather than through Bluetooth.
Connection Cables Sold Separately
The Cerbo GX includes the communication ports, but cables for connecting your other Victron equipment are not included in this combo. Depending on your system, you may require:
-
VE.Direct cables for SmartSolar, SmartShunt or Orion XS devices
-
RJ45 VE.Bus cable for a MultiPlus or MultiPlus-II
-
VE.Can cables and terminators
-
compatible BMS communication cables
-
tank or temperature sensors
The required cables depend on the equipment being connected.
Installation
The Cerbo GX MK2 accepts an 8–70V DC supply, allowing it to be used in 12V, 24V and 48V systems. Victron recommends powering the GX device directly from the battery system rather than from the AC output of an inverter. This keeps system monitoring available if the inverter shuts down.
The Cerbo GX itself is IP20 and should be installed in a dry, protected location. The GX Touch 70 is rated IP54 without its connectors and includes a protective cover.
What's Included
-
1 × Victron Cerbo GX MK2
-
1 × Victron GX Touch 70 7-inch touchscreen
-
GX Touch mounting hardware
-
GX Touch protective cover
-
Integrated 2m GX Touch HDMI / USB connection cable
Communication cables for other Victron equipment are sold separately.
Shipping Australia Wide
Orders are dispatched quickly from Australia. Questions? Hit us up, we're 4WDers too and happy to help.
Specifications
| Bundle | |
|---|---|
| Cerbo GX | Cerbo GX MK2 |
| Display | GX Touch 70 |
| Cerbo GX MK2 | |
| Supply Voltage | 8–70V DC |
| Power Draw Without GX Touch | 2.8W @ 12V |
| Power Draw with GX Touch – Backlight Off | 3.8W @ 12V |
| Power Draw with GX Touch – Maximum Backlight | 4.8W @ 12V |
| VE.Direct Ports | 3 × Isolated |
| Maximum VE.Direct Devices | 15 Including Supported USB Connections |
| VE.Bus | 2 × Paralleled Isolated RJ45 Sockets |
| VE.Can 1 | Isolated |
| VE.Can 2 | Non-Isolated |
| USB | 3 × USB Host Ports |
| Ethernet | 10/100 RJ45 |
| Wi-Fi | Built In, 2.4GHz |
| Bluetooth | Built In, Primarily for Setup & Network Configuration |
| Cerbo GX Inputs & Outputs | |
| Resistive Tank Level Inputs | 4 |
| Temperature Sensor Inputs | 4 |
| Digital Inputs | 4 |
| Programmable Relays | 2 × NO / NC |
| Relay Rating to 30V DC | 6A |
| Relay Rating to 70V DC | 1A |
| Relay AC Rating | 6A @ 125V AC |
| Cerbo GX Physical | |
| Dimensions | 78 × 154 × 48mm |
| Operating Temperature | -20°C to +50°C |
| Ingress Protection | IP20 |
| Mounting | Wall or 35mm DIN Rail with Optional DIN35 Adapter |
| GX Touch 70 | |
| Display Size | 7 Inch |
| Display Resolution | 1024 × 600 |
| Touch Control | Yes |
| Connection | Combined HDMI & USB Cable |
| Cable Length | 2m |
| Dimensions | 113 × 176 × 13.5mm |
| Ingress Protection | IP54 Without Connectors |
| Protective Cover | Included |
| Remote Monitoring | |
| Victron Remote Management | Yes |
| Internet Connection Required for Remote Access | Yes |
| Connection Options | Wi-Fi or Ethernet |
| Additional Information | |
| Brand | Victron Energy |
| Supplier Bundle SKU | VIC-Cerbo-MK2-Touch_70-01 |
| GX Touch 70 MPN | BPP900455070 |
| Cerbo GX MK2 MPN | BPP900450110 / BPP900451100 |
| Warranty | 5 Years |
Other Adventure-Ready Essentials
Gear up for your next journey