Victron Cerbo GX MK2 & GX Touch 50 Display Combo

Aussie Owned. Quality Gear. Honest Advice. 
Regular price
$629.00
Sale price
$629.00
Regular price
Tax included. Shipping calculated at checkout.

Product details

The Victron Cerbo GX MK2 and GX Touch 50 combo brings compatible Victron equipment together into one central monitoring and control system.

The Cerbo GX MK2 connects equipment such as MultiPlus inverter/chargers, SmartSolar regulators, SmartShunts, compatible batteries and system sensors. The GX Touch 50 adds a compact 5-inch touchscreen for viewing system data and accessing supported controls locally. Connect the Cerbo GX to the internet and the same system can also be monitored remotely through the Victron Remote Management portal.

Central Victron System Monitoring

The Cerbo GX MK2 acts as the communication hub between connected equipment. Depending on your system, it can bring together information including battery state of charge, charge and discharge current, solar production, inverter status, AC input and output, tank levels, temperatures and system alarms.

The Cerbo displays information received from connected equipment. Battery state of charge, for example, requires a compatible battery monitor, BMS or battery that provides that data.

GX Touch 50 Display

The GX Touch 50 provides a 5-inch, 800 × 480 touchscreen interface for the Cerbo GX.

Its compact 87 × 128 × 12.4mm body works well where panel or dash space is limited while still providing access to the full GX Remote Console interface.

The display connects to the Cerbo GX using its integrated 2m cable, terminating in HDMI for the display signal and USB for power.

VRM Remote Monitoring

With an internet connection through Wi-Fi or Ethernet, the Cerbo GX can send system data to the Victron Remote Management portal. VRM provides access to live system information, historical data, alarms and supported remote controls from a phone or computer. An active internet connection is required for remote access.

Multiple Communication Ports

The Cerbo GX MK2 includes:

  • 3 × isolated VE.Direct ports

  • 2 × parallel VE.Bus RJ45 sockets

  • 2 × configurable VE.Can interfaces

  • 3 × USB host ports

  • Ethernet

  • 2.4GHz Wi-Fi

  • Bluetooth

VE.Can 1 is galvanically isolated while VE.Can 2 is non-isolated. This allows the Cerbo to integrate a range of Victron equipment and compatible managed batteries within the same system.

Tank, Temperature & Digital Inputs

The Cerbo GX MK2 includes four resistive tank inputs, four temperature inputs and four digital inputs. Two programmable relays are also available for supported functions such as alarms, generator control, tank pumps, temperature based switching or manual operation. Suitable sensors are sold separately.

Bluetooth Is Primarily for Setup

Bluetooth on the Cerbo GX is mainly used for initial connection and network configuration. It does not replace the communication cables used to connect Victron Smart products to the GX system.

For example, a SmartSolar regulator or SmartShunt would normally connect through VE.Direct rather than communicating with the Cerbo over Bluetooth.

Connection Cables Sold Separately

Cables for connecting your other Victron equipment are not included with the combo. Depending on the system, you may require VE.Direct cables, RJ45 VE.Bus cable, VE.Can cabling and terminators or a battery-specific BMS communication cable. Choosing these cables based on the actual equipment in your system avoids paying for connections you do not need.

Installation

The Cerbo GX MK2 accepts an 8–70V DC supply, covering common 12V, 24V and 48V systems. The Cerbo itself is IP20 and should be installed in a dry, protected location.

The standard GX Touch 50 is rated IP54 without its connectors and includes mounting hardware and a protective cover.

What's Included

  • Victron Cerbo GX MK2

  • Victron GX Touch 50 5-inch touchscreen

  • GX Touch mounting hardware

  • GX Touch protective cover

  • Integrated 2m HDMI / USB display cable

Communication cables for other Victron equipment are sold separately.

Shipping Australia Wide

Orders are dispatched quickly from Australia. Questions? Hit us up, we're 4WDers too and happy to help.

Specifications

Bundle
System Controller Victron Cerbo GX MK2
Display Victron GX Touch 50
Cerbo GX MK2
Supply Voltage 8–70V DC
Power Draw Without GX Touch 2.8W @ 12V
Power Draw with GX Touch – Backlight Off 3.8W @ 12V
Power Draw with GX Touch – Maximum Backlight 4.8W @ 12V
Communication
VE.Direct Ports 3 × Isolated
Maximum VE.Direct Devices 15 Including Supported USB Connections
VE.Bus 2 × Parallel Isolated RJ45 Sockets
VE.Can 1 Configurable, Isolated
VE.Can 2 Configurable, Non-Isolated
USB 3 × USB Host Ports
Ethernet 10/100 RJ45
Wi-Fi Built In, 2.4GHz
Bluetooth Built In, Primarily for Setup & Network Configuration
Inputs & Outputs
Resistive Tank Level Inputs 4
Temperature Sensor Inputs 4
Digital Inputs 4
Programmable Relays 2 × NO / NC
Relay Rating to 30V DC 6A
Relay Rating to 70V DC 1A
Relay AC Rating 6A @ 125V AC
Cerbo GX MK2 Physical
Dimensions 78 × 154 × 48mm
Operating Temperature -20°C to +50°C
Ingress Protection IP20
Mounting Wall or 35mm DIN Rail with Optional Adapter
GX Touch 50
Display Size 5 Inch
Display Resolution 800 × 480
Touch Control Yes
Connection HDMI & USB
Integrated Cable Length 2m
Dimensions 87 × 128 × 12.4mm
Ingress Protection IP54 Without Connectors
Protective Cover Included
Remote Monitoring
Victron Remote Management Yes
Internet Required for Remote Access Yes
Network Connection Wi-Fi or Ethernet
Additional Information
Brand Victron Energy
Supplier Bundle SKU VIC-Cerbo-MK2-Touch_50-01
GX Touch 50 MPN BPP900455050
Cerbo GX MK2 MPN BPP900450110 / BPP900451100
Warranty 5 Years

Other Adventure-Ready Essentials

Gear up for your next journey