Exotronic 300W Fusion Fixed N-Type TOPCon Solar Panel - 1750 × 770mm
- Regular price
- $309.00
- Sale price
- $309.00
- Regular price
- $339.00
Product details
The Exotronic 300W Fusion is a high output fixed solar panel using N-Type TOPCon cells and a three-string parallel cell layout to reduce the impact of partial shading. At 1750 × 770mm, it delivers 300W from a relatively compact roof area, making it a strong option where you want more solar without spreading multiple smaller panels across the available space.
Electrical output is 19.2V Vmp and 15.63A Imp, making it suitable for 12V battery charging when paired with an appropriately sized solar regulator.
Three-String Shade Resistant Layout
The panel is divided into three independent cell strings connected in parallel across its width. If one section of the panel is shaded by something such as a roof vent, antenna or awning, the other strings can continue producing power rather than the entire panel being limited to the same degree.
It does not make the panel immune to shading, and regular shade should still be avoided when planning the installation, but the string layout gives it an advantage where occasional partial shading is difficult to eliminate.
N-Type TOPCon Cells
The Fusion Series uses N-Type TOPCon solar cells with a stated cell efficiency of 25.2%. TOPCon uses a thin tunnel oxide and passivated contact layer to reduce electrical losses within the cell. In practical terms, this allows more power to be produced from a given cell area and can improve low light performance and long term degradation compared with older P-Type cell designs.
The complete 300W module has an approximate area efficiency of 22.3%, once spacing, frame and other non-cell areas are included.
18-Wire Cell Design
The cells use an 18-wire current collection layout. Using more, finer conductors across the cell helps reduce the distance current needs to travel through the silicon and spreads electrical load more evenly across the cell surface. It also provides more current paths if a small section of the cell becomes damaged or obstructed.
Built for Permanent Installation
The panel uses a black anodised aluminium frame and high transmission tempered glass. It is rated for wind loads up to 2400Pa and snow loads up to 5400Pa, with resistance to salt mist and ammonia exposure. Dual rear junction boxes are fully potted to protect the electrical connections from moisture and vibration.
MC4 Compatible Connections
The panel is supplied with approximately 800mm solar leads and MC4 compatible connectors. When extending the solar cable, use correctly sized PV cable and compatible connectors. Avoid cross mating different connector manufacturers unless compatibility is specifically approved.
Regulator & Cable Sizing
The panel produces:
-
19.2V at maximum power
-
15.63A at maximum power
-
22.4V open circuit
-
16.95A short circuit current
Your solar regulator must be able to accept the panel's voltage, current and total PV wattage.
Cable sizing should also account for the relatively high current output of this panel. Longer cable runs may justify moving from 4mm² to 6mm² solar cable to reduce voltage drop.
If multiple panels are connected in parallel, their current is added together and the regulator, cabling and protection need to be sized accordingly.
Installation
- Before mounting, confirm the panel dimensions, roof structure, available clearance and regulator compatibility.
- Allow ventilation beneath the panel and avoid positioning it where roof accessories will create frequent shade.
- Do not drill or modify the panel frame outside the manufacturer's approved mounting points.
Shipping Australia Wide
Orders are dispatched quickly from Australia. Questions? Hit us up, we're 4WDers too and happy to help.
Specifications
| Electrical Characteristics | |
|---|---|
| Rated Maximum Power | 300W |
| Power Tolerance | ±3% |
| Maximum Power Voltage (Vmp) | 19.2V |
| Maximum Power Current (Imp) | 15.63A |
| Open Circuit Voltage (Voc) | 22.4V |
| Short Circuit Current (Isc) | 16.95A |
| Maximum System Voltage | 1000V DC |
| Solar Cell Technology | |
| Cell Type | N-Type TOPCon Monocrystalline |
| Cell Efficiency | 25.2% |
| Approx. Module Efficiency | 22.3% |
| Cell Interconnection | 18-Wire Design |
| Shade Management | 3 Independent Parallel Cell Strings |
| Mechanical Characteristics | |
| Dimensions | 1750 × 770 × 30mm |
| Weight | 14.3kg |
| Frame | Black Anodised Aluminium |
| Front Surface | High Transmission Tempered Glass |
| Junction Boxes | Dual, Fully Potted |
| Solar Leads | Approx. 800mm |
| Connectors | MC4 Compatible |
| Environmental & Mechanical Ratings | |
| Maximum Wind Load | 2400Pa |
| Maximum Snow Load | 5400Pa |
| Salt Mist Resistance | Yes |
| Ammonia Resistance | Yes |
| Standard Test Conditions | |
| Irradiance | 1000W/m² |
| Cell Temperature | 25°C |
| Air Mass | AM 1.5 |
| Additional Information | |
| Brand | Exotronic |
| Model / MPN | Exo-SP-TCN-300 |
| GTIN / Barcode | 9361784004501 |
| Country of Origin | China |
| HS Code | 8541430010 |
| Mobile / Marine Warranty | 5 Years |
| Fixed Building Installation Warranty | 10 Years |
Other Adventure-Ready Essentials
Gear up for your next journey