BMPRO PurePro2000 2000W Pure Sine Wave Inverter with RCD & Transfer Switch

Aussie Owned. Quality Gear. Honest Advice. 
Regular price
$1,049.00
Sale price
$1,049.00
Regular price
Tax included. Shipping calculated at checkout.

Product details

The BMPRO PurePro2000 gives a 12V battery system access to up to 2000W of clean 240V pure sine wave power, making it a strong fit for caravans, campers and off grid systems running everyday appliances without stepping up to a full 3000W inverter.

It combines pure sine wave output with an integrated RCD, automatic AC transfer switch, dual 240V outlets, LCD monitoring and a remote control panel. That makes it much more than a basic standalone inverter and particularly useful in permanently installed touring systems where the same appliances may be powered from mains electricity at a powered site and from the battery bank while off grid.

2000W Pure Sine Wave Output

The PurePro2000 provides 220 to 240V AC pure sine wave power at 50Hz with total harmonic distortion below 3%. Its 2000W continuous output is suitable for a wide range of touring appliances including coffee machines, microwaves, hair dryers, laptops, chargers, CPAP machines and power tools, provided the total load and startup current remain within the inverter’s limits. For short startup loads, BMPRO rates the unit to 2300W for 15 seconds, 2500W for 10 seconds, 3000W for 5 seconds and up to 4000W for 2 seconds.

Automatic AC Transfer Switch

The built in transfer switch allows connected loads to move automatically between mains power and inverter power. When suitable mains power is available, the PurePro passes that supply through to the connected loads. If mains power is lost or falls outside the accepted range, the inverter can switch back to battery supplied AC power in less than 30 milliseconds. This is particularly useful in caravans and campers that regularly move between powered sites and off grid camping.

Integrated RCD Protection

The PurePro2000 includes an integrated residual current device and is compliant with AS/NZS 4763. BMPRO states that the inverter can be used to supply fixed connections in transportable structures and vehicles when installed in accordance with AS/NZS 3001 by a licensed electrician.  Any fixed 240V wiring or transfer switch installation should be completed by an appropriately licensed electrician.

LCD and Remote Control

The onboard LCD provides access to operating information including DC input voltage, AC output voltage, output current, power and load percentage. A remote control panel is also included, allowing the inverter to be switched on and off from a more convenient location. The remote provides approximate battery and load indication as well as access to Eco mode, and is supplied with a 5m data cable.

Eco Mode

Large inverters can consume noticeable battery capacity even when no appliance is being used. The PurePro2000 draws less than 1.7A at no load in normal operation, while Eco mode reduces standby current to below 0.35A. This can make a worthwhile difference in systems that spend long periods with the inverter switched on but only use AC appliances occasionally.

Battery and Cabling Requirements

A 2000W inverter still places a significant load on a 12V battery system. BMPRO specifies a nominal input current of 200A and requires 50mm² stranded DC cable, a 250A DC fuse and a maximum cable length of 1500mm between the battery bank and inverter.

Battery capacity alone does not determine compatibility. The battery BMS, interconnections, isolator and protection devices must all be capable of safely supplying the required current.

Built In Protection

The PurePro monitors for overvoltage, undervoltage, reverse polarity, short circuit, excessive temperature and overload conditions. Cooling fan speed is controlled according to load and temperature rather than simply running continuously, helping manage both heat and noise as demand changes.

Installation Note

The inverter should be installed in a dry, clean and well ventilated location with at least 30mm clearance around the cooling fans. BMPRO also warns that the PurePro AC output must not be fed back into a power management system. When the automatic transfer switch is used, the mains supply to the inverter should be provided from a dedicated outlet and installed by a qualified electrician.

Shipping Australia Wide

Orders are dispatched quickly from Australia. Questions? Hit us up, we're 4WDers too and happy to help.

Specifications

Inverter Performance
Rated Power 2000W
Peak Power 4000W
DC Input Voltage 12V DC
DC Input Range 10.5 to 15.5V DC
Nominal Input Current 200A
No Load Current <1.7A Normal / <0.35A Eco Mode
AC Output Voltage 220 to 240V AC
AC Output Frequency 50Hz
AC Output Current 8.33A
Output Waveform Pure Sine Wave
Total Harmonic Distortion <3%
Efficiency >89%
Short Term Output Capability
15 Second Output Up to 2300W
10 Second Output Up to 2500W
5 Second Output Up to 3000W
2 Second Peak Output Up to 4000W
AC Transfer & Outputs
Automatic Transfer Switch Integrated
Transfer Switch Input Rating 2300W / 10A
Acceptable Mains Input Voltage 200 to 260V AC
Maximum Transfer Time <30ms
240V AC Outputs 2
RCD Protection Integrated
USB Output USB-A 5V DC / 2A
Battery & Installation
Compatible Battery Types STD, GEL, AGM & LiFePO4
Recommended DC Cable 50mm² Stranded Cable
Recommended DC Fuse 250A
Maximum DC Cable Length 1500mm
Minimum Earth Conductor 2.5mm²
Monitoring & Protection
Display Multi Function LCD
Remote Control Panel Included
Remote Data Cable 5m
Eco Mode Yes
Protection Overvoltage, Undervoltage, Reverse Polarity, Short Circuit, Over Temperature & Overload
Cooling Load & Temperature Controlled Fan Cooling
Dimensions & Construction
Dimensions 428 × 253 × 94mm
Weight 4.8kg
Ingress Protection IP22
Operating Temperature 0°C to +50°C
Additional Information
Brand BMPRO
Model / MPN PUREPRO2000
Compliance AS/NZS 4763
ATS Relay Compliance IEC 61810-1
Warranty 2 Years

Other Adventure-Ready Essentials

Gear up for your next journey