80/105 Series LandCruiser Rear Panhard Riser - Bolt on Kit Options

Aussie Owned. Quality Gear. Honest Advice. 
Regular price
$800.00
Sale price
$800.00
Regular price
Tax included. Shipping calculated at checkout.
Kit Option

Product details

The Rampt Customs Rear Panhard Riser is a bolt-on suspension geometry correction designed for Toyota 80 Series and 105 Series LandCruisers. It raises the rear panhard mounting point by 3 inches, helping bring the panhard closer to horizontal on a lifted vehicle and reducing the amount of lateral axle movement produced as the suspension travels through bump and rebound.

On a lifted 80 or 105 Series, the factory panhard operates at a greater angle than it does at standard ride height. Because the rear axle follows the arc of the panhard as the suspension moves, this angle can contribute to greater side-to-side axle movement through the suspension cycle. Raising the mounting position changes that geometry and also raises the rear roll centre, with Rampt designing the system to improve stability and reduce the body movement and rear-end lateral movement commonly felt in lifted Cruisers.

The bracket attaches to the original rear panhard mount on the differential housing and the passenger-side upper control arm mount. Installation of the bracket itself requires no cutting, grinding, drilling or welding. Rampt Customs designs and manufactures its 4WD suspension and fabrication components from its workshop in Newcastle, NSW.

Two Panhard Mounting Positions

The Rampt riser provides two alternative mounting positions depending on the panhard being used.

Position 1 raises the panhard mount 3 inches and moves the mounting point approximately 1 inch farther across. This position accepts the factory-style Toyota panhard bush, but the standard factory panhard is too short for the relocated mounting point. An aftermarket adjustable panhard is required so the rear axle can be correctly centred beneath the vehicle.

Position 2 is also 3 inches higher but extends the effective mounting position approximately 4 inches farther across. It is specifically designed for the Rampt extended rear panhard offered with this kit.

A longer panhard operates through a larger-radius arc, reducing the amount of sideways axle displacement generated for a given amount of vertical suspension travel. This is why panhard rods are generally designed to be as long and as close to horizontal as practical within the available suspension geometry.

Extended 7075-T6 Panhard

The extended panhard is manufactured from solid 1.5 inch / 38.1 mm 7075-T6 aluminium and uses a Whiteline polyurethane bush at one end. The opposite end can be supplied with either a 7/8 inch DFI three-piece heim or a 7/8 inch FK rod end, depending on the selected variant. The heim joint allows angular misalignment through the panhard's operating range while the polyurethane bush provides the bushed chassis or axle connection used in Rampt's design.

Minimum 70 mm Bump Stop Extension Required

This is an important fitment requirement. The outer rear bump stops located beneath the chassis rails must be extended by a minimum of 70 mm when the panhard riser bracket is fitted. This provides the clearance required to prevent the riser bracket contacting the chassis at full bump.

Bump stop extensions are available as part of selected kit options. Do not fit the riser bracket without confirming adequate bump stop extension and clearance throughout the full suspension travel.

Which Kit Option Do I Need?

Bracket Only

Includes the rear panhard riser bracket. You will still require:

  • Minimum 70 mm outer bump stop extensions

  • A suitable aftermarket adjustable panhard

The factory panhard itself is too short for the relocated mounting position.

Bracket & Bump Extensions

Includes the rear panhard riser bracket and Rampt bump stop extensions. You will still require a suitable aftermarket adjustable panhard.

Bracket & Extended Panhard – DFI Heim

Includes the rear panhard riser bracket and extended 7075-T6 panhard with 7/8 inch DFI three-piece heim. You will still require minimum 70 mm outer bump stop extension if this is not already fitted to the vehicle.

Bracket & Extended Panhard – FK Heim

Includes the rear panhard riser bracket and extended 7075-T6 panhard with 7/8 inch FK rod end. You will still require minimum 70 mm outer bump stop extension if this is not already fitted to the vehicle.

Bracket, Bump Extensions & Panhard – DFI Heim

Includes the rear panhard riser bracket, bump stop extensions and extended 7075-T6 panhard with 7/8 inch DFI three-piece heim. This is the complete Rampt configuration using the extended panhard.

Bracket, Bump Extensions & Panhard – FK Heim

Includes the rear panhard riser bracket, bump stop extensions and extended 7075-T6 panhard with 7/8 inch FK rod end. This is the complete Rampt configuration using the extended panhard.

Extended Panhard Only – DFI Heim

Extended 7075-T6 panhard with 7/8 inch DFI three-piece heim and Whiteline polyurethane bush. This panhard is designed for the extended mounting position provided by the Rampt rear panhard riser bracket.

Extended Panhard Only – FK Heim

Extended 7075-T6 panhard with 7/8 inch FK rod end and Whiteline polyurethane bush. This panhard is designed for the extended mounting position provided by the Rampt rear panhard riser bracket.

Lift Height

Rampt lists the rear panhard riser as suitable across lift heights, while stating that the suspension geometry produces its best results at approximately 3 to 4 inches of lift or less. Rampt also notes that vehicles with a 2 to 3 inch lift can see a particularly noticeable improvement compared with taller 4 to 6 inch setups. The actual panhard angle, bump clearance and axle position should always be checked on the individual vehicle rather than relying on nominal lift height alone.

Installation & Rear Axle Alignment

After installation, the rear axle must be correctly centred beneath the chassis. We recommend measuring between consistent reference points on the chassis and tyres before installation, then adjusting the panhard after installation until the corresponding measurements are matched.

For the bracket mounting hardware, Rampt specifies:

  • M18 bolt through the original panhard mounting position: 70 Nm

  • M16 bolt through the upper control arm mounts: 70 Nm

  • Bolt through the new panhard mounting position: Toyota factory torque specification

Rampt specifically states that the M18 and M16 mounting bolts listed above should be tightened to 70 Nm only. Clearance should then be checked throughout the suspension's usable range of travel for your individual vehicle setup.

Important Fitment Information

This product is designed for Toyota 80 Series and 105 Series LandCruisers An aftermarket adjustable panhard is required when using the first riser mounting position. The original factory panhard is not long enough for the relocated mounting position.

The Rampt extended panhard is intended for the second, extended mounting position on the Rampt riser bracket. Minimum 70 mm outer bump stop extensions are required whenever the riser bracket is installed. Suspension clearance varies depending on lift height, shock length, bump stop configuration, tyre size and other vehicle modifications. Full bump, droop and component clearance should be checked for the individual vehicle after installation.

Rampt Customs also states generally that, unless otherwise specified, its products are designed for off-road use. Vehicle modification and engineering requirements vary between Australian states and territories, so confirm the requirements applicable to your vehicle before installation.

Shipping Australia Wide

Orders are dispatched quickly from Australia. Questions? Hit us up, we're 4WDers too and happy to help.

Specifications

Fitment & Geometry
Vehicle Compatibility Toyota 80 Series & 105 Series LandCruiser
Installation Bolt-on bracket; no cutting, grinding, drilling or welding required
Mount Position 1 3" higher and approximately 1" farther across; accepts factory-style Toyota panhard bush; aftermarket adjustable panhard required
Mount Position 2 3" higher and approximately 4" farther across; designed for Rampt extended panhard
Minimum Bump Stop Extension 70 mm outer rear bump stop extension required
Finish Satin black powder coat
Extended Panhard
Construction Solid 7075-T6 aluminium
Diameter 1.5" / 38.1 mm
Heim Options 7/8" DFI three-piece heim or 7/8" FK rod end
Bushed End Whiteline polyurethane bush
Installation Torque
M18 Factory-Location Panhard Bolt 70 Nm
M16 Upper Link Mount Bolt 70 Nm
New Panhard Location Bolt Torque to Toyota factory specification


FAQ's

Will the rear panhard riser change how my LandCruiser handles?

Yes, that is the purpose of correcting the panhard geometry. Raising the rear panhard mounting point brings the bar closer to horizontal on a lifted 80 or 105 Series LandCruiser. This reduces the amount of lateral axle movement generated as the suspension moves through its travel and raises the rear roll centre.

The result should be improved stability, reduced body roll and less of the rear-end lateral movement often felt over bumps in lifted vehicles. The amount of change you notice will depend on your lift height, existing suspension geometry and overall vehicle setup.

Will the panhard riser affect suspension flex?

The riser is designed to change the path of the rear axle rather than prevent the suspension from articulating. We recommend a minimum 70 mm extension to the outer rear bump stops so the riser cannot contact the chassis at full bump. Shock length, bump stop height, spring setup and other suspension modifications can all influence the usable travel available on an individual vehicle.

For this reason, we recommend checking clearance through the suspension's operating range after installation rather than assuming every modified 80 or 105 Series will behave identically.

Will my existing aftermarket panhard work with the riser?

A suitable aftermarket adjustable panhard can be used with the first mounting position. This mounting position is approximately 1 inch farther across than the original location, so the panhard needs enough adjustment to correctly centre the rear axle beneath the vehicle.

The original fixed-length Toyota panhard is too short for the relocated position. If you're unsure whether your current panhard has enough adjustment, email us at info@northadventures.com.au with the brand or a photo of your current setup and we'll help you work through it.

I only have a 2 to 3 inch lift. Is the panhard riser still worthwhile?

The riser can be used across a range of lift heights, with approximately 2 to 4 inches being a particularly relevant range for correcting rear panhard angle. The actual benefit depends more on the panhard angle and suspension geometry of the individual vehicle than the advertised lift height alone.

Do I need to centre the rear axle again after installation?

Yes, as the new panhard mounting position changes the effective geometry and length required, the rear axle should be checked and re-centred after installation. We recommend taking measurements between consistent chassis and tyre reference points before removing the original setup, then adjusting the panhard after installation until the corresponding measurements are equal. It is also worth checking the axle position before beginning, as the rear diff may not have been perfectly centred beforehand.

What is the advantage of the extended panhard?

The extended panhard uses the second mounting position on the riser, which places the connection approximately 4 inches farther across than the original mounting position. Increasing the effective panhard length increases the radius of the arc the axle travels through. For the same amount of vertical suspension movement, a longer panhard therefore produces less lateral axle displacement than a shorter one.

The extended panhard is manufactured from solid 1.5 inch / 38.1 mm 7075-T6 aluminium and is available with either a 7/8 inch DFI three-piece heim or an FK rod end, with a Whiteline polyurethane bush at the opposite end. The standard riser position remains available for customers who already have a suitable adjustable panhard, while the extended option provides the longer-panhard geometry.

Do I need extended bump stops?

Yes. We recommend a minimum 70 mm extension to the outer rear bump stops located beneath the chassis rails whenever the panhard riser bracket is fitted. This clearance is required so the riser bracket cannot contact the chassis at full bump. We do not recommend installing the riser without confirming the required bump stop extension and checking clearance on your individual suspension setup.

Which kit should I order?

If you already have a suitable adjustable aftermarket panhard and at least 70 mm of outer rear bump stop extension, the Bracket Only option may be all you require.

If you already have an adjustable panhard but still need the required bump stop clearance, choose Bracket & Bump Extensions.

For customers wanting to use the longer second mounting position, choose one of the kits containing the Extended Panhard, available with either a DFI or FK heim.

The complete Bracket, Bump Extensions & Panhard options contain the riser, bump stop extensions and extended panhard together.

Not sure which setup suits your vehicle? Email info@northadventures.com.au with your lift height, current panhard and bump stop setup and we'll help you choose the right configuration.

Other Adventure-Ready Essentials

Gear up for your next journey