{"product_id":"4-6mm-high-bond-tape-for-flexible-solar-panels-8-25m-roll","title":"4.6mm High Bond Tape for Flexible Solar Panels - 8.25m Roll","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eThis 4.6mm High Bond Acrylic Foam Tape provides a strong, cushioned bond while creating a substantially thicker bond line than conventional double-sided mounting tapes.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSunman has recently advised that our 4.6mm High Bond tape is their preferred mounting method for its new panels. We're currently developing an updated installation guide around this recommendation to make installation as straightforward as possible.\u003c\/p\u003e\n\u003cp\u003eSupplied in a 12mm wide × 8.25m roll, the tape is also suitable for automotive, caravan, RV, marine, signage and general bonding applications where a strong, thicker acrylic foam bond is required.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4.6mm thick acrylic foam construction\u003c\/li\u003e\n\u003cli\u003e12mm wide × 8.25m roll\u003c\/li\u003e\n\u003cli\u003ePreferred mounting tape for Sunman's new flexible solar panels\u003c\/li\u003e\n\u003cli\u003eStrong viscoelastic acrylic bond\u003c\/li\u003e\n\u003cli\u003eThick, cushioned bond line\u003c\/li\u003e\n\u003cli\u003e180° peel adhesion ≥4,500 gf\/25mm on stainless steel\u003c\/li\u003e\n\u003cli\u003eTensile strength ≥5,500 gf\/cm²\u003c\/li\u003e\n\u003cli\u003eDynamic shear strength ≥5,300 gf\/cm² after 24 hours\u003c\/li\u003e\n\u003cli\u003eShort-term temperature resistance up to 160°C\u003c\/li\u003e\n\u003cli\u003eLong-term temperature resistance up to 120°C\u003c\/li\u003e\n\u003cli\u003eSuitable for a range of automotive, solar, marine and industrial applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlexible Solar Panel Installation\u003c\/h3\u003e\n\u003cp\u003eFlexible solar panels present a different mounting challenge to conventional framed panels. You need a secure bond while accounting for the characteristics of both the panel backing and the surface underneath.\u003c\/p\u003e\n\u003cp\u003eThe substantial 4.6mm acrylic foam layer provides a thicker, more cushioned bond line than conventional thin double-sided tapes, while the viscoelastic acrylic foam helps distribute stress across the bonded area.\u003c\/p\u003e\n\u003cp\u003eSunman has recently updated its preferred mounting method for its new panels and has advised that our 4.6mm High Bond tape is their preferred tape for installation. We're currently working on an updated installation guide to reflect this recommendation.\u003c\/p\u003e\n\u003cp\u003eAlways follow the current installation requirements for your specific solar panel and mounting surface.\u003c\/p\u003e\n\u003ch3\u003eStrong Acrylic Foam Bond\u003c\/h3\u003e\n\u003cp\u003eThe tape uses an acrylic adhesive with a grey acrylic foam carrier, providing a strong bond without requiring visible mechanical fixings in applications where adhesive mounting is appropriate.\u003c\/p\u003e\n\u003cp\u003eUnder the stated test conditions, it achieves 180° peel adhesion of at least 4,500 gf\/25mm on stainless steel and dynamic shear strength of at least 5,300 gf\/cm² following 24 hours at room temperature.\u003c\/p\u003e\n\u003cp\u003eActual bond performance will depend on the mounting surface, preparation, installation pressure and environmental conditions.\u003c\/p\u003e\n\u003ch3\u003eMade for High-Temperature Applications\u003c\/h3\u003e\n\u003cp\u003eSolar panels, vehicle roofs and caravan surfaces can become extremely hot when exposed to the Australian sun, making temperature resistance an important consideration when choosing an adhesive.\u003c\/p\u003e\n\u003cp\u003eThe tape is rated for short-term temperature exposure up to 160°C and long-term exposure up to 120°C under the manufacturer's specified test conditions.\u003c\/p\u003e\n\u003ch3\u003eNot Just for Solar\u003c\/h3\u003e\n\u003cp\u003eThe 4.6mm High Bond Tape can also be used for a range of suitable applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive trim and accessories\u003c\/li\u003e\n\u003cli\u003eCaravans and RVs\u003c\/li\u003e\n\u003cli\u003eMarine applications\u003c\/li\u003e\n\u003cli\u003eNameplates, badges and signage\u003c\/li\u003e\n\u003cli\u003eElectronics assembly\u003c\/li\u003e\n\u003cli\u003eCushioning protectors\u003c\/li\u003e\n\u003cli\u003eGeneral fabrication and industrial applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSurface Preparation Matters\u003c\/h3\u003e\n\u003cp\u003eFor maximum bond performance, apply the tape between 0°C and 35°C. Surfaces must be clean, dry and free from dust, grease, wax, polish, silicone and other contaminants.\u003c\/p\u003e\n\u003cp\u003eClean the bonding surfaces with isopropyl alcohol and allow them to dry completely before installation. Avoid touching the exposed adhesive and apply firm, even pressure across the entire bond area.\u003c\/p\u003e\n\u003cp\u003eAllow at least 24 hours at approximately 23°C for the adhesive to develop the stated level of performance.\u003c\/p\u003e\n\u003ch3\u003eCheck Compatibility Before Installation\u003c\/h3\u003e\n\u003cp\u003eDifferent solar panels, vehicle roofs, caravan skins and mounting surfaces use different materials and coatings, which can affect adhesive performance.\u003c\/p\u003e\n\u003cp\u003eAlways confirm compatibility with your particular panel and substrate before installation and follow the panel manufacturer's current installation requirements. Where possible, test adhesion on a small section or offcut first.\u003c\/p\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eStore in a clean, dry and well-ventilated environment, preferably between 10°C and 30°C. Minimum shelf life is six months when stored under the recommended conditions.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eProduct Details\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eBG734F-4.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e4.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier\u003c\/td\u003e\n\u003ctd\u003eGrey Acrylic Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive\u003c\/td\u003e\n\u003ctd\u003eAcrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiner\u003c\/td\u003e\n\u003ctd\u003eRed PE Release Film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eAdhesion \u0026amp; Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e≥5,500 gf\/cm² (Aluminium T-Block, ASTM D-897)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180° Peel Adhesion\u003c\/td\u003e\n\u003ctd\u003e≥4,500 gf\/25mm (Stainless Steel, ASTM D-3330)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolding Power\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;24 Hours (Stainless Steel, ASTM D-3654, 80°C, 1000g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic Shear Strength – 20 Minutes\u003c\/td\u003e\n\u003ctd\u003e≥3,000 gf\/cm² at Room Temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic Shear Strength – 24 Hours\u003c\/td\u003e\n\u003ctd\u003e≥5,300 gf\/cm² at Room Temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatic Shear\u003c\/td\u003e\n\u003ctd\u003e10,000 Minutes (250g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eTemperature Performance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort-Term Temperature Resistance\u003c\/td\u003e\n\u003ctd\u003e160°C (100g, 4 Hours)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLong-Term Temperature Resistance\u003c\/td\u003e\n\u003ctd\u003e120°C (250g, 10,000 Minutes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eApplication \u0026amp; Storage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Application Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBonding Period for Stated Performance\u003c\/td\u003e\n\u003ctd\u003e24 Hours at 23°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Storage Temperature\u003c\/td\u003e\n\u003ctd\u003e10°C to 30°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Shelf Life\u003c\/td\u003e\n\u003ctd\u003e6 Months When Stored Under Recommended Conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping Australia Wide\u003c\/h3\u003e\n\u003cp\u003eOrders are dispatched quickly from Australia. Questions? Hit us up, we're 4WDers too and happy to help.\u003c\/p\u003e","brand":"North Adventures","offers":[{"title":"Default Title","offer_id":45560130240598,"sku":"RP-PK-Tape4.6","price":23.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/1329\/3398\/files\/Screenshot2026-08-14053103.png?v=1786650088","url":"https:\/\/www.northadventures.com.au\/products\/4-6mm-high-bond-tape-for-flexible-solar-panels-8-25m-roll","provider":"North Adventures","version":"1.0","type":"link"}